4 One way to tell your blades need sharpening is by looking at the cut ends of the blades of grass. Read more to see how you can do it yourself quickly and cheaply.
Paul
4 
4 There are many different kinds of welding gloves for different welding processes. Read more to make sure you are using the right ones!
Tools of the Trade! – Welding Gloves
5 Welding pliers are a must-have for anybody with a MIG welder. Read more for lots of pictures and explanation on how they work.
Tools of the Trade! – MIG Welding Pliers
2 Center punches will help you more accurately mark and drill holes so they are right the first time. Read more to learn about center punches and how they will improve your projects!
Tools of the Trade! – Center Punches
1 Everybody loves tools right? Well, maybe you don’t but I bet there is a father in your life that does! Check out my list for the top 10 tool gifts for Father’s Day 2018! (Reminder, it is June 17th!)
Top 10 Father’s Day Tool/Garage Gifts 2018
1 So this is part 2 of my garage lighting experience. I of course decided that the 4 new lights weren’t enough, so it was time to install two more. Read more to check out the completed project.
DIY – How to Install LED Garage Lighting Part 2
Drill bits are expensive and I tend to be somewhat abusive to them. It is cheaper to sharpen them than to replace, especially for the larger drill bits. Read more to check out my experience with a Drill Doctor Drill Bit Sharpener.
Tools of the Trade! – Drill Doctor Bit Sharpener
2 It is no secret that it is handy to have a 2″ hitch on just about everything. It was bugging me that my Deere zero turn mower didn’t have one. Read more to see how I built one for my tractor.
DIY – Zero Turn Mower Receiver Hitch
6 So if you work in any kind of garage or shop that is not a barn, there is likely a lot of concrete. The best way to take care of concrete is to clean and seal it periodically. Read more to see how I sealed mine.
DIY – How to Seal Garage Floor
1 One big part of getting yourself out in the garage is making it easier to do work. One of the things I truly hate in the garage is rolling out and winding back up air-hoses. Air hose reels make life a lot easier, but take some up front work to […]
DIY – How to Install Garage Air Hose Reel
5 Hooray for Christmas and Happy New Year! I got a set of 4 sweet new LED overhead lights for my garage for Christmas. Read more to see what I got and how I hung them up!
DIY – How to Install LED Garage Lighting
2 I haven’t been able to weld since we recently moved about 8 months ago because there are no 220V outlets in the new garage. Read more to see how we ran wires through the finished basement to the other side of the house to run my welder and air compressor!
Running 220V to Garage for Welders and Compressors
1 We recently moved, so I have a chance for a fresh start in a new to me 3 car garage! Read more to see the initial setup of the new garage where we install Menards Xtreme Modular Shelving units and load them up!
DIY Metal Fabrication Moving & Installing New Garage Shelves
3 I put mulching ‘Gator’ blades on my zero turn the other day. They helped, but still aren’t quite ‘cutting it’ (see what I did there…). Read more to see how you can make your own mulch plug step by step just in time for leaf season!
DIY John Deere 54″ Zero Turn Mulch Plug
Hello everybody. Long time no post (my bad 😛 ) I haven’t been doing a lot of welding lately, but I did just finish up a project of putting front and rear lights on my zero turn. I did it without drilling a single hole anywhere on the mower. My […]
DIY Zero Turn Headlight Installation Guide
2 Just got back from Western Farm show 2017 looking at some cool tools, attachments, and tractors! In case you aren’t local to Kansas City or missed it, here are 50 pictures I took at the event.