Well, after a good run since 2011 I finally got rid of Ol’ Blue so I could move on to a new project. Read more to see what I got and some of my future plans.
Ol’ Blue my ’71 LS powered offroad truck has been giving me some bad driveshaft vibrations over 50 mph while decelerating. Looking into it further, I discovered that my pinion angle needed adjusting. Read more to see how I fixed it.
This is part 2 of our build up of a tube bumper and winch mount for ‘Ol Blue. Today we Gusset the frame and add tube reinforcement, then mount and wire the winch!
Finally the payoff for all the work I have put into Ol’ Blue over the last couple of years. We took a day trip to Kansas Rocks and had a blast! Check out the gallery for 50+ cool offroad pics.
Now that I have my LS Swap done and running. I am ready to start off-roading this bad boy. Check out this post for Part 1 of my custom front tube bumper with winch mount!
Part 4! I feel like I am finally starting to close the gap on this project! With Part 4 we are going to button up a bunch of small stuff and order a bunch of parts.
In part 2 we left off with the motor bolted to the trans waiting for me to build some motor mounts. Time flies because that was almost a month ago! In Part 3 I make the motor mounts, fix the gas tank, and make some EGR blockoff plates.
How to fix a leak around the shift shaft on your TH400 / TH350 Chevrolet automatic transmission. This is one of those projects that I have been putting off for a long time, but I should have done it a long time ago because it was really easy.
So my very long story short is that I have been having issues with my Big Block Chevy engine ever since I got it. I finally hit the last straw a couple of weeks ago and decided to try my hand at a 5.3 LS swap.